Main Features

1.Video Display
☉Support 1-64 channels video & audio input.
☉Provides a hybrid solution with IP Camear that would integrated with existing analog cameras.
☉Each channel can be compressed independently in 25F/S(PAL) or 30F/S(NTSC), total max 1920 fps record and display in a PC system.
☉Support matrix video output & group video output.
☉High resolution , image very soft and cannot see a little shake in dynamic images.
☉Single images how or several image show, Split auto switch and lagging time is less than 0.1 second in real-time showing.
☉Adjust brightness, contrast, saturation and hue of image successively.
☉Show the status of each channel. eg. Normal record, Sensor record, motion record or only monitoring. Show information of HDD.
☉Overlap camera name on it’s image. show OSD & LOGO (optional) freely.
☉1-64 channels of audio and video can be input synchronously with influent and clear timbre and no cacophony.
☉Video and audio can be received and stored synchronously. the video data and audio data will be packed the same package. There is no distortion when it was being  played back.

2.Recording &storing

☉Adopts the most advanced H.264 compression technology, the data of recording is 0.5 k/f at the least.
☉Every channel can be real-time hardware compressed independently with 25F/S (PAL) or 30F/S (NTSC), it supports not only variable bit rate but also variable frame rate.
☉Every channel can setup the recording mode, such as: consecutive recording, motion recording, sensor recording etc. and can setup recording by scheme.
☉Camera starts to record and link up with relative one or several cameras to record together when there are illegal intruder. At the same time it can send alarm for a long distance.
☉Any camera can be linked up one or several delay out, and, one sensor can be linked up one or several camera recording. It starts up light & record when there have a alarm.
☉The quality and continuity of every image when recording can be adjusted freely.
☉System can overlap watermark of character and date.
☉It supports multi-hard disk circular recording, so one need not change disk by hand.

3.Playback

☉Playback and record can run at the same time and there without mutual effect .
☉System can set precisely any hour, any minute and second to quickly index record data.
☉System can index record data by time or affair. The record data information is very clear by figure.
☉System can playback in single partition or multi-partition.
☉The pace of play back is full real-time(25f/s).
☉System has several playing back paces: play back normally, single frame, quickly (2-5 time), slowly ( 1/2-1/5), freezing images and skipping to the set time.
☉It can capture image or local enlarge image when playback.
☉System support to playback video images on the local end and the remote network terminal at the same time.
☉System support to playback part zoom realtimely.

4.Control function

☉It supports multi-lens control in every position, which can be controlled by hand or automatically.
☉It supports focus of electric zooming lens, light loop and zooming control. 
☉It also supports some auxiliary controls, such as light, windshield, etc.
☉It can control the speed dome camera and set up the speed dome camera's previous location by hand and alarm linkage previous location. The pace of writhing speed dome camera can be adjusted. It also supports control alarm output by hand or alarm linkage output.

5.Alarm function

☉It has 16 channels of sensor alarm input and output. Special alarm decoder is optional. It can connect several alarm detectors as alarm input facilities, such as infrared ray, smoke receptors, etc.
☉It has the function of alarm linkage recording, namely one or several detectors being linked with one or several cameras. It can start up recording with relative cameras and alarm facilities like alarm chirp or glittering when the detector is touched.
☉Support one or more sensor link up one or more speed dome, When the sensor is touched , the speed dome shifts the monitoring angle to the one previously set up and records, start up alarm chirp and glittering .
☉It has the function of alarm previous recording, storing previously the recorded information before alarm. The time of recording previously can be set.
☉It has the alarm function of motion detect.
☉It has the alarm function of video loss. The system would start up alarm automatically when the camera's signal can’t input to the system normally.
☉It has the long-distance transmission function of alarm signals through network.
☉Send Email automatically. When appointed camera or sensor have a alarm, system will capture the current image, and send the image as attachment to the appointed mailbox.
☉Support search log by alarm.
☉Users can draw digital maps and set alarm spot according to different situations. The digital map will pop-up automatically after alarming and show the position of alarming.

6.Network function

☉Support link up the network with PSTN、ISDN、ADSL、DDN、LAN、Internet etc.
☉It adopts advanced network compression format and adapts to bandwidth and sets the resource automatically. the quality of images is good and the time lag of network is shortened.
☉Support one or several client visit one server and one or several client visit several several server.
☉The respective control end has all the functions of the local server, including monitor image in long-distance, remote search record data, receiving remote alarm and setting up the system parameter .
☉The client end has the storing function of local recording and play back function of multi-image.
☉The server operator can create user for client end. Different user has different right. Reinforce the security of system.

7.Authority management and system protection

☉Locks keyboard and mouse preventing unauthorized access to the system.

This system widely used in bank, telecommunication, transportation, factories, warehouse, irrigation, ect